Vagabond 2.0 Annex Setup for Extra Sleeping Space
By ROAM Adventure Co. | Published: 2026-10-22
Category: How-to Guides
Learn how to set up the Vagabond 2.0 Annex to add a ground-level sleeping area below your rooftop tent, with step-by-step instructions and common mistakes to avoid.
Quick Answer
The Vagabond 2.0 Annex attaches to the porch of your Vagabond 2.0 Tent to create a protected ground-level sleeping or gear storage area. Setup takes about 15 minutes and requires no tools beyond the included hardware.
Why Add the Annex for Extra Sleeping Space
If your rooftop tent sleeps two but you need room for a third person or extra gear, the annex provides a dry, ventilated space directly below the tent. The 6.5-foot length from the bottom of the tent gives enough headroom for most adults to sit or kneel, and the mesh windows allow airflow without letting bugs in.
One trade-off: the annex adds setup time and requires a clear area beneath the tent. If your campsite has uneven ground or heavy rain, the floorless design means you'll want a ground tarp inside.
Step-by-Step Setup Guide
- 1. Position the Tent and Clear the Ground: Park your vehicle on level ground and deploy the Vagabond 2.0 Tent fully. Clear rocks, sticks, and debris from the area directly below the tent porch where the annex will sit. A common mistake: setting up on a slope causes the annex floor to sag and water to pool. Check ground slope with a level app before setup.
- 2. Attach the Annex to the Tent Porch: Unzip the annex bag and lay the annex flat beneath the tent porch. Align the top edge of the annex with the bottom edge of the tent porch. Use the included hook-and-loop straps and buckles to secure the annex to the tent frame. Ensure the zipper tracks are aligned so the annex can be zipped shut. A common mistake: attaching the annex upside down—the mesh windows should face outward. Double-check orientation before buckling.
- 3. Stake Out the Annex Corners: Pull each corner of the annex outward until the fabric is taut but not stretched. Insert the included stakes through the corner loops at a 45-degree angle away from the annex. A common mistake: staking straight down, which lets the fabric sag and collect water. Stake at an angle for better tension.
- 4. Adjust Tension and Close the Doors: Walk around the annex and adjust the strap tension so the walls are smooth. Zip the door closed and check that the mesh screen lies flat. Open the rear access door to verify it clears your vehicle's tailgate. A common mistake: leaving the annex too loose, which causes flapping in wind and reduces usable space. Tighten straps until fabric has no ripples.
- 5. Add a Ground Tarp or Sleeping Pad: Place a ground tarp inside the annex to keep moisture out. Add sleeping pads, cots, or gear as needed. A common mistake: using the annex without a tarp on wet ground, which leads to damp sleeping bags. Always carry a tarp for floorless annexes.
Product Details
- Vagabond 2.0 Annex: The Vagabond 2.0 Annex attaches to the porch of the Vagabond 2.0 Tent and gives you a secondary ground dwelling location below the tent. It features 2 mesh windows and 1 zipper door with a mesh screen and 1 access door on the back to access your vehicle. The mesh windows provide ventilation and bug protection, while the rear access door lets you reach your vehicle without leaving the annex—useful for grabbing gear or changing clothes.
Vagabond 2.0 Annex
