How to Install 55L Rigid Mounts on a Rugged Case

Quick Answer

To install 55L Rigid Mounts on a Rugged Case, position the mounts in the case's tie-down channels, align the 1/4-inch holes with your rack or surface, and bolt them down using your own hardware.

Installation Steps

1. Gather your hardware: Collect the 55L Rigid Mounts, your Rugged Case, and the necessary bolts, washers, and nuts (not included). Confirm they fit 1/4-inch holes and are appropriate for your roof rack or surface. Check that your hardware is the right size and grade before starting.
2. Position the case: Place the 55L Rugged Case on your roof rack or mounting surface where you want it secured. Ensure it is centered and aligned with your rack's mounting points. Double-check alignment to avoid crooked mounting.
3. Insert the mounts: Slide the rigid mounts into the tie-down channels on the bottom of the case. Adjust them so the 1/4-inch holes line up with the holes in your rack or surface. Make sure both mounts are evenly positioned in the channels.
4. Bolt the mounts down: Insert bolts through the mount holes and your rack's mounting points, then secure with washers and nuts. Tighten firmly, but avoid over-tightening to prevent stripping. Use a torque wrench if available to achieve consistent tightness.
5. Test the installation: Once all bolts are tightened, give the case a firm shake to ensure it is secure. Check for any movement or gaps between the mounts and the case. If there is any movement, re-tighten or adjust the mounts before driving.

Product Facts

• 55L Rigid Mounts: The 55L Rigid Mount is a hard-mounted system designed to mount a 55L Rugged Case to your roof rack or any mounting surface, with 1/4-inch holes for bolting down and .188 black powder-coated steel construction. The steel construction and 1/4-inch mounting holes provide a sturdy, durable attachment point, but you'll need to supply the bolts and hardware to complete the installation.