Starlink Mini Rugged Case Mounts: Installation Guide

Quick answer

Mount your Starlink Mini inside the lid of a compatible ROAM Rugged Case using the Starlink Mini Rugged Case Mounts kit. The dish stays hidden and protected while the signal passes through the case roof.

Installation steps

1. Prepare your case and kit: Open your ROAM Rugged Case and remove any lid organizer or accessories. Lay the Starlink Mini Rugged Case Mounts kit flat and identify the mounting bracket, screws, and washers. Common mistake: Skipping the dry fit can lead to misalignment once the adhesive backing is exposed.
2. Position the mounting bracket: Hold the bracket against the inside of the lid where you want the dish. Center it for balanced weight distribution. Mark the screw holes lightly with a pencil. Checkpoint: Ensure the bracket doesn't interfere with the lid's closing or the case's latches. If the bracket feels loose after tightening, add a washer to each screw.
3. Attach the bracket to the lid: Drill pilot holes at your marks (if required by your case material), then screw the bracket into place using the supplied hardware. Tighten evenly but don't overtighten—plastic threads can strip. Common mistake: Overtightening can crack the case or strip the screw hole.
4. Mount the Starlink Mini: Slide the Starlink Mini onto the bracket until it clicks or locks into place (refer to your kit's locking mechanism). Route the cable neatly along the lid's edge and secure it with the included clips or cable ties. Checkpoint: Leave enough slack so the lid can open fully without stressing the cable. Test the lid closure before finalizing cable routing to avoid pinching.
5. Test the signal: Close the case and place it in an open area with a clear view of the sky. Power on the Starlink Mini and verify it acquires satellites through the case roof. Common mistake: A metal case or thick lid can block the signal; ROAM Rugged Cases are designed for this, but avoid placing the case under a metal roof or tree canopy.

Product facts

• Starlink Mini Rugged Case Mounts: The Starlink Mini Rugged Case Mounting Kit lets you securely mount your Starlink Mini to the inside of a 66L, 83L, 95L, & 128L Rugged Case lid. You can choose the right kit for your case size without guesswork, and the dish stays hidden and protected during travel.