What the LED Track Light Does for Your Tent
The ROAM LED Track Light is a 6-foot rope light designed for outdoor use under awnings and inside rooftop tents. It provides efficient, versatile lighting that can be mounted in several ways depending on your setup. This guide explains the supported installation methods for the Vagabond and Desperado tents, as well as how to use the light as a hanging lantern.
LED Track Light Facts
- LED Track Light: The LED Track Light is a 6ft rope light that can slide into the channel of the ARC 270 Awning arm, the front extrusion of the Standard Awnings, or in the extrusion of the Vagabond and Desperado tents. This tells you exactly which tent models and awning arms are compatible with the track light, so you know if it will fit your setup before you begin installation.

LED Track Light - LED Track Light: The LED Track Light comes with the LED light strip, Lantern Sack, and Battery Pack. Knowing what's included helps you confirm you have all the parts needed for installation and for using the light in lantern mode.
How to Install the LED Track Light in a Rooftop Tent
The supplied evidence confirms that the LED Track Light slides into the extrusion of Vagabond and Desperado tents. The following steps are based on that supported compatibility. The catalog does not specify a particular order for these actions, so use this sequence as a practical guide.
- Identify the tent extrusion channel: Locate the extrusion (the aluminum channel) on your Vagabond or Desperado tent where the track light fits. The light is designed to slide into this channel for a secure mount.
- Slide the LED strip into the channel: Take the 6ft LED light strip and gently slide it into the tent's extrusion channel. Ensure the strip is fully seated along the desired length for even lighting.
- Connect the battery pack: Attach the included battery pack to the LED strip. The pack powers the light and is designed to be portable, so you can place it in a convenient location near the tent entrance or on the tent floor.
- Test the light: Turn on the battery pack to verify the light operates correctly. Check that the strip is secure and the light illuminates the tent interior as expected.
Using the Track Light as a Lantern
If you prefer a hanging light source instead of a fixed strip, the LED Track Light can be used as a lantern. Keep the light inside the included Lantern Sack and turn it on. The sack diffuses the light, creating a soft lantern effect. The sack has a webbing strap and buckle for easy hanging from a tent frame or tree branch. The light also features toggles and loops so it can be hung inside the Vagabond tent around the tent frame, giving you flexible placement options without permanent installation.
What the Catalog Does Not Confirm
The supplied information does not include specific instructions for attaching the track light to the ARC 270 Awning arm or Standard Awnings. If you plan to use the light with those awnings, refer to the product's included documentation or contact ROAM Adventure Co. for guidance. The catalog also does not specify battery life, charging time, or brightness levels, so those details are not available in this guide.

